Gradle plugin to verify a provider

Gradle plugin for verifying pacts against a provider.

The Gradle plugin creates a task pactVerify to your build which will verify all configured pacts against your provider.

Important Note: Any properties that need to be set when using the Gradle plugin need to be provided with -P and not -D as with the other Pact-JVM modules!

To Use It

For Gradle versions 2.1+

plugins {
  id "au.com.dius.pact" version "4.3.10"
}

For Gradle versions prior to 2.1 or if you can't access the Gradle plugin portal

1.1. Add the gradle jar file to your build script class path:

buildscript {
    repositories {
        mavenCentral()
    }
    dependencies {
        classpath 'au.com.dius.pact.provider:gradle:4.3.10'
    }
}

1.2. Apply the pact plugin

apply plugin: 'au.com.dius.pact'

2. Define the pacts between your consumers and providers

pact {

    serviceProviders {

        // You can define as many as you need, but each must have a unique name
        provider1 {
            // All the provider properties are optional, and have sensible defaults (shown below)
            protocol = 'http'
            host = 'localhost'
            port = 8080
            path = '/'

            // Again, you can define as many consumers for each provider as you need, but each must have a unique name
            hasPactWith('consumer1') {

                // currently supports a file path using file() or a URL using url()
                pactSource = file('path/to/provider1-consumer1-pact.json')

            }

            // Or if you have many pact files in a directory
            hasPactsWith('manyConsumers') {

                // Will define a consumer for each pact file in the directory.
                // Consumer name is read from contents of pact file
                pactFileLocation = file('path/to/pacts')

            }

        }

    }

}

3. Execute `gradle pactVerify`

Project Properties

The following project properties can be specified with -Pproperty=value on the command line:

Property	Description
`pact.showStacktrace`	This turns on stacktrace printing for each request. It can help with diagnosing network errors
`pact.showFullDiff`	This turns on displaying the full diff of the expected versus actual bodies
`pact.filter.consumers`	Comma seperated list of consumer names to verify
`pact.filter.description`	Only verify interactions whose description match the provided regular expression
`pact.filter.providerState`	Only verify interactions whose provider state match the provided regular expression. An empty string matches interactions that have no state
`pact.filter.pacturl`	This filter allows just the just the changed pact specified in a webhook to be run. It should be used in conjunction with `pact.filter.consumers`
`pact.verifier.publishResults`	Publishing of verification results will be skipped unless this property is set to 'true'
`pact.verifier.ignoreNoConsumers`	If set to `true`, don't fail the build if there are no consumers to verify [4.1.19+]

The following project properties must be specified as system properties:

Property	Description
`pact.verifier.disableUrlPathDecoding`	Disables decoding of request paths
`pact.pactbroker.httpclient.usePreemptiveAuthentication`	Enables preemptive authentication with the pact broker when set to `true`
`pact.provider.tag`	Sets the provider tag to push before publishing verification results (can use a comma separated list)
`pact.provider.branch`	Sets the provider branch to push before publishing verification results
`pact.content_type.override.<TYPE>.<SUBTYPE>=<VAL>` where `<VAL>` may be `text`, `json` or `binary`	Overrides the handling of a particular content type [4.1.3+]
`pact.verifier.enableRedirectHandling`	Enables automatically handling redirects [4.1.8+]
`pact.verifier.generateDiff`	Controls the generation of diffs. Can be set to `true`, `false` or a size threshold (for instance `1mb` or `100kb`) which only enables diffs for payloads of size less than that [4.2.7+]
`pact.verifier.buildUrl`	Specifies buildUrl to report to the broker when publishing verification results [4.2.16/4.3.2+]
`pactbroker.consumerversionselectors.rawjson`	Overrides the consumer version selectors with raw JSON [4.1.29+/4.3.0+]

Specifying the provider hostname at runtime

If you need to calculate the provider hostname at runtime, you can give a Closure as the provider host.

pact {

    serviceProviders {

        provider1 {
            host = { lookupHostName() }

            hasPactWith('consumer1') {
                pactFile = file('path/to/provider1-consumer1-pact.json')
            }
        }

    }

}

You can also give a Closure as the provider port.

Specifying the pact file or URL at runtime

If you need to calculate the pact file or URL at runtime, you can give a Closure as the provider pactFile.

pact {

    serviceProviders {

        provider1 {
            host = 'localhost'

            hasPactWith('consumer1') {
                pactFile = { lookupPactFile() }
            }
        }

    }

}

Starting and shutting down your provider

If you need to start-up or shutdown your provider, define Gradle tasks for each action and set
startProviderTask and terminateProviderTask properties of each provider. You could use the jetty tasks here if you provider is built as a WAR file.

// This will be called before the provider task
task('startTheApp') {
  doLast {
    // start up your provider here
  }
}

// This will be called after the provider task
task('killTheApp') {
  doLast {
    // kill your provider here
  }
}

pact {

    serviceProviders {

        provider1 {

            startProviderTask = startTheApp
            terminateProviderTask = killTheApp

            hasPactWith('consumer1') {
                pactFile = file('path/to/provider1-consumer1-pact.json')
            }

        }

    }

}

Following typical Gradle behaviour, you can set the provider task properties to the actual tasks, or to the task names as a string (for the case when they haven't been defined yet).

Preventing the chaining of provider verify task to `pactVerify`

Normally a gradle task named pactVerify_${provider.name} is created and added as a task dependency for pactVerify. You can disable this dependency on a provider by setting isDependencyForPactVerify to false (defaults to true).

pact {

    serviceProviders {

        provider1 {

            isDependencyForPactVerify = false

            hasPactWith('consumer1') {
                pactFile = file('path/to/provider1-consumer1-pact.json')
            }

        }

    }

}

To run this task, you would then have to explicitly name it as in gradle pactVerify_provider1, a normal gradle pactVerify would skip it. This can be useful when you want to define two providers, one with startProviderTask/terminateProviderTask and as second without, so you can manually start your provider (to debug it from your IDE, for example) but still want a pactVerify to run normally from your CI build.

Enabling insecure SSL

For providers that are running on SSL with self-signed certificates, you need to enable insecure SSL mode by setting insecure = true on the provider.

pact {

    serviceProviders {

        provider1 {
            insecure = true // allow SSL with a self-signed cert
            hasPactWith('consumer1') {
                pactFile = file('path/to/provider1-consumer1-pact.json')
            }

        }

    }

}

Specifying a custom trust store

For environments that are running their own certificate chains:

pact {

    serviceProviders {

        provider1 {
            trustStore = new File('relative/path/to/trustStore.jks')
            trustStorePassword = 'changeit'
            hasPactWith('consumer1') {
                pactFile = file('path/to/provider1-consumer1-pact.json')
            }

        }

    }

}

trustStore is either relative to the current working (build) directory. trustStorePassword defaults to changeit.

NOTE: The hostname will still be verified against the certificate.

Modifying the HTTP Client Used

The default HTTP client is used for all requests to providers (created with a call to HttpClients.createDefault()). This can be changed by specifying a closure assigned to createClient on the provider that returns a CloseableHttpClient. For example:

pact {

    serviceProviders {

        provider1 {

            createClient = { provider ->
                // This will enable the client to accept self-signed certificates
                HttpClients.custom().setSSLHostnameVerifier(new NoopHostnameVerifier())
                    .setSslcontext(new SSLContextBuilder().loadTrustMaterial(null, { x509Certificates, s -> true })
                        .build())
                    .build()
            }

            hasPactWith('consumer1') {
                pactFile = file('path/to/provider1-consumer1-pact.json')
            }

        }

    }

}

Modifying the requests before they are sent

Sometimes you may need to add things to the requests that can't be persisted in a pact file. Examples of these would be authentication tokens, which have a small life span. The Pact Gradle plugin provides a request filter that can be set to a closure on the provider that will be called before the request is made. This closure will receive the HttpRequest prior to it being executed.

pact {

    serviceProviders {

        provider1 {

            requestFilter = { req ->
                // Add an authorization header to each request
                req.addHeader('Authorization', 'OAUTH eyJhbGciOiJSUzI1NiIsImN0eSI6ImFw...')
            }

            hasPactWith('consumer1') {
                pactFile = file('path/to/provider1-consumer1-pact.json')
            }

        }

    }

}

Important Note: You should only use this feature for things that can not be persisted in the pact file. By modifying the request, you are potentially modifying the contract from the consumer tests!

Turning off URL decoding of the paths in the pact file

By default the paths loaded from the pact file will be decoded before the request is sent to the provider. To turn this behaviour off, set the property pact.verifier.disableUrlPathDecoding to true.

Important Note: If you turn off the url path decoding, you need to ensure that the paths in the pact files are correctly encoded. The verifier will not be able to make a request with an invalid encoded path.

Overriding the handling of a body data type

NOTE: version 4.1.3+

By default, bodies will be handled based on their content types. For binary contents, the bodies will be base64 encoded when written to the Pact file and then decoded again when the file is loaded. You can change this with an override property: pact.content_type.override.<TYPE>.<SUBTYPE>=text|binary. For instance, setting pact.content_type.override.application.pdf=text will treat PDF bodies as a text type and not encode/decode them.

Provider States

For a description of what provider states are, see the pact documentations: https://docs.pact.io/getting_started/provider_states

Using a state change URL

For each provider you can specify a state change URL to use to switch the state of the provider. This URL will receive the providerState description and all the parameters from the pact file before each interaction via a POST. As for normal requests, a request filter (stateChangeRequestFilter) can also be set to manipulate the request before it is sent.

pact {

    serviceProviders {

        provider1 {

            hasPactWith('consumer1') {
                pactFile = file('path/to/provider1-consumer1-pact.json')
                stateChangeUrl = url('http://localhost:8001/tasks/pactStateChange')
                stateChangeUsesBody = false // defaults to true
                stateChangeRequestFilter = { req ->
                    // Add an authorization header to each request
                    req.addHeader('Authorization', 'OAUTH eyJhbGciOiJSUzI1NiIsImN0eSI6ImFw...')
                }
            }

            // or
            hasPactsWith('consumers') {
                pactFileLocation = file('path/to/pacts')                
                stateChangeUrl = url('http://localhost:8001/tasks/pactStateChange')
                stateChangeUsesBody = false // defaults to true
            }

        }

    }

}

If the stateChangeUsesBody is not specified, or is set to true, then the provider state description and parameters will be sent as JSON in the body of the request :

{ "state" : "a provider state description", "params": { "a": "1", "b": "2" } }

If it is set to false, they will be passed as query parameters.

Teardown calls for state changes

You can enable teardown state change calls by setting the property stateChangeTeardown = true on the provider. This will add an action parameter to the state change call. The setup call before the test will receive action=setup, and then a teardown call will be made afterwards to the state change URL with action=teardown.

Using a Closure

You can set a closure to be called before each verification with a defined provider state. The closure will be called with the state description and parameters from the pact file.

pact {

    serviceProviders {

        provider1 {

            hasPactWith('consumer1') {
                pactFile = file('path/to/provider1-consumer1-pact.json')
                // Load a fixture file based on the provider state and then setup some database
                // data. Does not require a state change request so returns false
                stateChange = { providerState ->
                    // providerState is an instance of ProviderState
                    def fixture = loadFixtuerForProviderState(providerState)
                    setupDatabase(fixture)
                }
            }

        }

    }

}

Teardown calls for state changes

You can enable teardown state change calls by setting the property stateChangeTeardown = true on the provider. This will add an action parameter to the state change closure call. The setup call before the test will receive setup, as the second parameter, and then a teardown call will be made afterwards with teardown as the second parameter.

pact {

    serviceProviders {

        provider1 {

            hasPactWith('consumer1') {
                pactFile = file('path/to/provider1-consumer1-pact.json')
                // Load a fixture file based on the provider state and then setup some database
                // data. Does not require a state change request so returns false
                stateChange = { providerState, action ->
                    if (action == 'setup') {
                      def fixture = loadFixtuerForProviderState(providerState)
                      setupDatabase(fixture)
                    } else {
                      cleanupDatabase()
                    }
                    false
                }
            }

        }

    }

}

Returning values that can be injected

You can have values from the provider state callbacks be injected into most places (paths, query parameters, headers, bodies, etc.). This works by using the V3 spec generators with provider state callbacks that return values. One example of where this would be useful is API calls that require an ID which would be auto-generated by the database on the provider side, so there is no way to know what the ID would be beforehand.

There are methods on the consumer DSLs that can provider an expression that contains variables (like '/api/user/${id}' for the path). The provider state callback can then return a map for values, and the id attribute from the map will be expanded in the expression. For URL callbacks, the values need to be returned as JSON in the response body.

Filtering the interactions that are verified

You can filter the interactions that are run using three project properties: pact.filter.consumers, pact.filter.description and pact.filter.providerState. Adding -Ppact.filter.consumers=consumer1,consumer2 to the command line will only run the pact files for those consumers (consumer1 and consumer2). Adding -Ppact.filter.description=a request for payment.* will only run those interactions whose descriptions start with 'a request for payment'. -Ppact.filter.providerState=.*payment will match any interaction that has a provider state that ends with payment, and -Ppact.filter.providerState= will match any interaction that does not have a provider state.

Verifying pact files from a pact broker

You can setup your build to validate against the pacts stored in a pact broker. The pact gradle plugin will query the pact broker for all consumers that have a pact with the provider based on its name.

For Pact-JVM 4.1.0 and later

First: Add a `broker` configuration block

You can enable Pact broker support by adding a broker configuration block to the pact block.

For example:

pact {

    broker {
        pactBrokerUrl = 'https://your-broker-url/'
    
        // To use basic auth    
        pactBrokerUsername = '<USERNAME>'
        pactBrokerPassword = '<PASSWORD>'
    
        // OR to use a bearer token
        pactBrokerToken = '<TOKEN>'
    }

}

Second: Define your service provider

pact {

  serviceProviders {
    myProvider { // Define the name of your provider here

      fromPactBroker {
        // For 4.3.10+ 
        withSelectors {
          branch('test') // the latest version from a particular branch of each consumer.
        }
       
        // For versions before 4.3.10
        selectors = latestTags('test') // specify your tags here. You can leave this out to just use the latest pacts  
      }

    }
  }

}

Using consumer version selectors (4.3.10+)

You can use a number of different selectors to fetch Pact files that match some criteria. See Consumer Version Selectors for more information. The following selectors are available:

Main branch

The latest version from the main branch of each consumer, as specified by the consumer's mainBranch property.

    fromPactBroker {
        withSelectors {
            mainBranch()
        }
    }

Matching branch

The latest version from any branch of the consumer that has the same name as the current branch of the provider. Used for coordinated development between consumer and provider teams using matching feature branch names.

    fromPactBroker {
        withSelectors {
            matchingBranch()
        }
    }

Branch

The latest version from a particular branch of each consumer, or for a particular consumer if the second parameter is provided. If fallback is provided, falling back to the fallback branch if none is found from the specified branch.

    fromPactBroker {
        withSelectors {
            branch('FEAT-1234') // Latest version from the particular branch of each consumer
          
            branch('FEAT-1234', 'consumer-a') // Latest version from the particular branch of the provided consumer
         
            branch('FEAT-1234', null, 'master') // Fall back to master branch if none is found from the specified feature branch
            branch('FEAT-1234', 'consumer-a', 'master') // As above, but for a single consumer
        }
    }

Deployed or released

All the currently deployed and currently released and supported versions of each consumer. You can also specify if deployed or released to a particular environment.

    fromPactBroker {
        withSelectors {
            deployedOrReleased() // All the currently deployed and currently released and supported versions of each consumer.

            deployedTo('test') // Any versions currently deployed to the specified environment
            releasedTo('test') // Any versions currently released and supported in the specified environment   
            environment('test') // any versions currently deployed or released and supported in the specified environment
        }
    }

Raw JSON

You can also provide the raw JSON snippets for selectors.

    fromPactBroker {
        withSelectors {
          rawSelectorJson('{"tag": "tagname"}')
        }
    }

For Pact-JVM versions before 4.1.0

You configure your service provider and then use the hasPactsFrom.. methods.

For example:

pact {

    serviceProviders {
        provider1 {
            // You can get the latest pacts from the broker
            hasPactsFromPactBroker('http://pact-broker:5000/')
            // And/or you can get the latest pact with a specific tag
            hasPactsFromPactBrokerWithTag('http://pact-broker:5000/',"tagname")
        }
    }

}

This will verify all pacts found in the pact broker where the provider name is 'provider1'. If you need to set any values on the consumers from the pact broker, you can add a Closure to configure them.

pact {

    serviceProviders {
        provider1 {
            hasPactsFromPactBroker('http://pact-broker:5000/') { consumer ->
                 stateChange = { providerState -> /* state change code here */ true }
            }
        }
    }

}

To only load the pacts when running the validate task, you can do something like:

pact {

    serviceProviders {
        provider1 {
            // Only load the pacts from the broker if the start tasks from the command line include pactVerify
            if ('pactVerify' in gradle.startParameter.taskNames) {
                hasPactsFromPactBroker('http://pact-broker:5000/') { consumer ->
                     stateChange = { providerState -> /* state change code here */ true }
                }
            }
        }
    }

}

Using an authenticated Pact Broker

You can add the authentication details for the Pact Broker like so:

pact {

    serviceProviders {
        provider1 {
            hasPactsFromPactBroker('http://pact-broker:5000/', authentication: ['Basic', pactBrokerUser, pactBrokerPassword])
        }
    }

}

pactBrokerUser and pactBrokerPassword can be defined in the gradle properties.

Or with a bearer token:

pact {

    serviceProviders {
        provider1 {
            hasPactsFromPactBroker('http://pact-broker:5000/', authentication: ['Bearer', pactBrokerToken])
        }
    }
    
}

Preemptive Authentication can be enabled by setting the pact.pactbroker.httpclient.usePreemptiveAuthentication property to true.

NOTE: If you're using pactflow.io, follow these instructions for configuring your bearer token.

Allowing just the changed pact specified in a webhook to be verified [4.0.6+]

When a consumer publishes a new version of a pact file, the Pact broker can fire off a webhook with the URL of the changed pact file. To allow only the changed pact file to be verified, you can override the URL by using the pact.filter.pacturl project properties.

For example, running:

gradle pactVerify -Ppact.filter.pacturl=https://test.pact.dius.com.au/pacts/provider/Activity%20Service/consumer/Foo%20Web%20Client/version/1.0.1

will only run the verification with the given pact file URL.

Verifying pact files from a S3 bucket

NOTE: You will need to add the Amazon S3 SDK jar file to your project.

Pact files stored in an S3 bucket can be verified by using an S3 URL to the pact file. I.e.,

pact {

    serviceProviders {

        provider1 {

            hasPactWith('consumer1') {
                pactFile = 's3://bucketname/path/to/provider1-consumer1-pact.json'
            }

        }

    }

}

NOTE: you can't use the url function with S3 URLs, as the URL and URI classes from the Java SDK don't support URLs with the s3 scheme.

Publishing pact files to a pact broker

NOTE: There is a pact CLI that can be used to publish pacts. See https://github.com/pact-foundation/pact-ruby-cli.

The pact gradle plugin provides a pactPublish task that can publish all pact files in a directory to a pact broker. To use it, you need to add a publish configuration to the pact configuration that defines the directory where the pact files are and the URL to the pact broker.

If you have configured your broker details in a broker configuration block, the task will use that. Otherwise, configure the broker details on the publish block.

For example:

pact {

    publish {
        pactDirectory = '/pact/dir' // defaults to $buildDir/pacts
        pactBrokerUrl = 'http://pactbroker:1234'
    }

}

You can set any tags that the pacts should be published with by setting the tags property. A common use of this is setting the tag to the current source control branch. This supports using pact with feature branches.

pact {

    publish {
        pactDirectory = '/pact/dir' // defaults to $buildDir/pacts
        tags = [project.pactBrokerTag]
    }

}

NOTE: The pact broker requires a version for all published pacts. The pactPublish task will use the version of the gradle project by default. You can override this with the consumerVersion property. Make sure you have set one otherwise the broker will reject the pact files.

Publishing to an authenticated pact broker

To publish to a broker protected by basic auth, include the username/password in the broker configuration

For example:

pact {

    broker {
        pactBrokerUrl = 'https://your-broker-url/'
    
        // To use basic auth    
        pactBrokerUsername = '<USERNAME>'
        pactBrokerPassword = '<PASSWORD>'
    
        // OR to use a bearer token
        pactBrokerToken = '<TOKEN>'
    }

}

You can add the username and password as properties on the publish block.

pact {

    publish {
        pactBrokerUrl = 'https://mypactbroker.com'
        pactBrokerUsername = 'username'
        pactBrokerPassword = 'password'
    }

}

or with a bearer token

pact {

    publish {
        pactBrokerUrl = 'https://mypactbroker.com'
        pactBrokerToken = 'token'
    }

}

Excluding pacts from being published

You can exclude some of the pact files from being published by providing a list of regular expressions that match against the base names of the pact files.

For example:

pact {

    publish {
        excludes = [ '.*\\-\\d+$' ] // exclude all pact files that end with a dash followed by a number in the name 
    }

}

Including the consumer branch when publishing [min versions 4.1.33/4.2.19/4.3.4]

The consumer branch and build URL can be included when the pacts are published. This requires Pact Broker version 2.86.0 or later.

The branch name and build URL can either be configured in the project or as system properties or environment variables.

Configured in the build

There are attributes on the publish block to set these values.

pact {

    publish {
      consumerBranch = 'feat/test'
      // build URL is optional 
      consumerBuildUrl = 'https://github.com/pact-foundation/pact-jvm/actions/runs/1685674772'
    }

}

Configured as JVM system properties

You can configure these values as system properties using the following keys:

pact.publish.consumer.buildUrl
pact.publish.consumer.branchName
pact.publish.consumer.version

Configured as environment variables

You can configure these values as environment variables using the following keys:

pact.publish.consumer.buildUrl
pact.publish.consumer.branchName
pact.publish.consumer.version

PACT_PUBLISH_CONSUMER_BUILDURL
PACT_PUBLISH_CONSUMER_BRANCHNAME
PACT_PUBLISH_CONSUMER_VERSION

Verifying a message provider

The Gradle plugin has been updated to allow invoking test methods that can return the message contents from a message producer. To use it, set the way to invoke the verification to ANNOTATED_METHOD. This will allow the pact verification task to scan for test methods that return the message contents.

Add something like the following to your gradle build file:

pact {

    serviceProviders {

        messageProvider {

            verificationType = 'ANNOTATED_METHOD'
            packagesToScan = ['au.com.example.messageprovider.*'] // This is optional, but leaving it out will result in the entire
                                                                  // test classpath being scanned

            hasPactWith('messageConsumer') {
                pactFile = url('url/to/messagepact.json')
            }

        }

    }

}

Now when the pactVerify task is run, will look for methods annotated with @PactVerifyProvider in the test classpath that have a matching description to what is in the pact file.

class ConfirmationKafkaMessageBuilderTest {

  @PactVerifyProvider('an order confirmation message')
  String verifyMessageForOrder() {
      Order order = new Order()
      order.setId(10000004)
      order.setExchange('ASX')
      order.setSecurityCode('CBA')
      order.setPrice(BigDecimal.TEN)
      order.setUnits(15)
      order.setGst(new BigDecimal('15.0'))
      order.setFees(BigDecimal.TEN)

      def message = new ConfirmationKafkaMessageBuilder()
              .withOrder(order)
              .build()

      JsonOutput.toJson(message)
  }

}

It will then validate that the returned contents matches the contents for the message in the pact file.

Verification Reports

The default behaviour is to display the verification being done to the console, and pass or fail the build via the normal Gradle mechanism. Additional reports can be generated from the verification.

Enabling additional reports

The verification reports can be controlled by adding a reports section to the pact configuration in the gradle build file.

For example:

pact {

    reports {
      defaultReports() // adds the standard console output

      markdown // report in markdown format
      json // report in json format
    }
}

Any report files will be written to "build/reports/pact".

Additional Reports

The following report types are available in addition to console output (which is enabled by default): markdown, json.

Publishing verification results to a Pact Broker

For pacts that are loaded from a Pact Broker, the results of running the verification can be published back to the broker against the URL for the pact. You will be able to see the result on the Pact Broker home screen.

To turn on the verification publishing, set the project property pact.verifier.publishResults to true.

To provide the build URL, set the JVM system property pact.verifier.buildUrl.

By default, the Gradle project version will be used as the provider version. You can override this by setting the providerVersion property.

pact {
    serviceProviders {
        provider1 {
            providerVersion = { branchName() + '-' + abbreviatedId() }
            hasPactsFromPactBroker('http://pact-broker:5000/', authentication: ['Basic', pactBrokerUser, pactBrokerPassword])
        }
    }
}

Tagging the provider before verification results are published [4.0.1+]

You can have a tag pushed against the provider version before the verification results are published. There are two ways to do this with the Gradle plugin. You can provide a closure in a similar way to the provider version, i.e.

pact {
    serviceProviders {
        provider1 {
            providerVersion = { branchName() + '-' + abbreviatedId() }
            providerTags = { [ branchName() ] }
            hasPactsFromPactBroker('http://pact-broker:5000/', authentication: ['Basic', pactBrokerUser, pactBrokerPassword])
        }
    }
}

or you can set the pact.provider.tag JVM system property. For example:

$ ./gradlew -d pactverify -Ppact.verifier.publishResults=true -Dpact.provider.tag=Test2

From 4.1.8+, you can specify multiple tags with an array for the providerTag value, or a comma separated string for the pact.provider.tag system property.

Pending Pact Support (version 4.1.0 and later)

If your Pact broker supports pending pacts, you can enable support for that by enabling that on your Pact broker annotation or with JVM system properties. You also need to provide the tags that will be published with your provider's verification results. The broker will then label any pacts found that don't have a successful verification result as pending. That way, if they fail verification, the verifier will ignore those failures and not fail the build.

For example:

pact {

  serviceProviders {
    myProvider {

      fromPactBroker {
        selectors = latestTags('test') // specify your tags here. You can leave this out to just use the latest pacts
        enablePending = true // enable pending pacts support
        providerTags = ['master'] // specify the provider main-line tags  
      }

    }
  }

}

Then any pending pacts will not cause a build failure.

Can I Deploy check

There is a canIDeploy Gradle task that you can use to preform a deployment safety check. This task requires two parameters: pacticipant and either pacticipantVersion or latest=true. It will use the configuration from the broker section of your Gradle build.

$ ./gradlew canideploy -Ppacticipant='Activity Service' -Platest=true

> Task :canIDeploy FAILED
Computer says no ¯\_(ツ)_/¯ 

The verification between the latest version of Foo Web Client 2 (1.2.3/AB) and the latest version of Activity Service (0.0.3) failed
There is no verified pact between the latest version of Foo Web Client (1.2.3/AB) and the latest version of Activity Service (0.0.3)

FAILURE: Build failed with an exception.

* What went wrong:
Can you deploy? Computer says no ¯\_(ツ)_/¯ 

* Try:
Run with --stacktrace option to get the stack trace. Run with --info or --debug option to get more log output. Run with --scan to get full insights.

* Get more help at https://help.gradle.org

BUILD FAILED in 1s

Enabling retry when there are unknown results (4.1.11+)

It can happen that there are still unknown results in the Pact broker because the provider verification is still running. You can enable a retry with a wait interval to poll for the results to become available. There are two settings that can be added to the broker configuration to enable this: retryCountWhileUnknown and retryWhileUnknownInterval.

Field	Description	Default
retryCountWhileUnknown	The amount of times to retry while there are unknown results	0
retryWhileUnknownInterval	The number of seconds to wait between retries	10

Example use:

pact {
  broker {
      pactBrokerUrl = 'http://localhost:1234/'
      retryCountWhileUnknown = 3
      retryWhileUnknownInterval = 120 // 2 minutes between retries
  }
}

Verifying V4 Pact files that require plugins (version 4.3.0+)

Pact files that require plugins can be verified with version 4.3.0+. For details on how plugins work, see the Pact plugin project.

Each required plugin is defined in the plugins section in the Pact metadata in the Pact file. The plugins will be loaded from the plugin directory. By default, this is ~/.pact/plugins or the value of the PACT_PLUGIN_DIR environment variable. Each plugin required by the Pact file must be installed there. You will need to follow the installation instructions for each plugin, but the default is to unpack the plugin into a sub-directory <plugin-name>-<plugin-version> (i.e., for the Protobuf plugin 0.0.0 it will be protobuf-0.0.0). The plugin manifest file must be present for the plugin to be able to be loaded.

Test Analytics

We are tracking anonymous analytics to gather important usage statistics like JVM version and operating system. To disable tracking, set the 'pact_do_not_track' system property or environment variable to 'true'.

To Use It​

For Gradle versions 2.1+​

For Gradle versions prior to 2.1 or if you can't access the Gradle plugin portal​

1.1. Add the gradle jar file to your build script class path:​

1.2. Apply the pact plugin​

2. Define the pacts between your consumers and providers​

3. Execute gradle pactVerify​

Project Properties

Specifying the provider hostname at runtime​

Specifying the pact file or URL at runtime​

Starting and shutting down your provider​

Preventing the chaining of provider verify task to pactVerify​

Enabling insecure SSL​

Specifying a custom trust store​

Modifying the HTTP Client Used​

Modifying the requests before they are sent​

Turning off URL decoding of the paths in the pact file​

Overriding the handling of a body data type​

Provider States​

Using a state change URL​

Teardown calls for state changes​

Using a Closure​

Teardown calls for state changes​

Returning values that can be injected​

Filtering the interactions that are verified​

Verifying pact files from a pact broker​

For Pact-JVM 4.1.0 and later​

First: Add a broker configuration block​

Second: Define your service provider​

Using consumer version selectors (4.3.10+)​

Main branch​

Matching branch​

Branch​

Deployed or released​

Tags​

Raw JSON​

For Pact-JVM versions before 4.1.0​

Using an authenticated Pact Broker​

Allowing just the changed pact specified in a webhook to be verified [4.0.6+]​

Verifying pact files from a S3 bucket​

Publishing pact files to a pact broker

Publishing to an authenticated pact broker​

Excluding pacts from being published​

Including the consumer branch when publishing [min versions 4.1.33/4.2.19/4.3.4]​

Configured in the build​

Configured as JVM system properties​

Configured as environment variables​

Verifying a message provider

Verification Reports

Enabling additional reports​

Additional Reports​

Publishing verification results to a Pact Broker

Tagging the provider before verification results are published [4.0.1+]​

Pending Pact Support (version 4.1.0 and later)

Can I Deploy check

Enabling retry when there are unknown results (4.1.11+)​

Verifying V4 Pact files that require plugins (version 4.3.0+)

Test Analytics

To Use It

For Gradle versions 2.1+

For Gradle versions prior to 2.1 or if you can't access the Gradle plugin portal

1.1. Add the gradle jar file to your build script class path:

1.2. Apply the pact plugin

2. Define the pacts between your consumers and providers

3. Execute `gradle pactVerify`

Specifying the provider hostname at runtime

Specifying the pact file or URL at runtime

Starting and shutting down your provider

Preventing the chaining of provider verify task to `pactVerify`

Enabling insecure SSL

Specifying a custom trust store

Modifying the HTTP Client Used

Modifying the requests before they are sent

Turning off URL decoding of the paths in the pact file

Overriding the handling of a body data type

Provider States

Using a state change URL

Teardown calls for state changes

Using a Closure

Teardown calls for state changes

Returning values that can be injected

Filtering the interactions that are verified

Verifying pact files from a pact broker

For Pact-JVM 4.1.0 and later

First: Add a `broker` configuration block

Second: Define your service provider

Using consumer version selectors (4.3.10+)

Main branch

Matching branch

Branch

Deployed or released

Tags

Raw JSON

For Pact-JVM versions before 4.1.0

Using an authenticated Pact Broker

Allowing just the changed pact specified in a webhook to be verified [4.0.6+]

Verifying pact files from a S3 bucket

Publishing to an authenticated pact broker

Excluding pacts from being published

Including the consumer branch when publishing [min versions 4.1.33/4.2.19/4.3.4]

Configured in the build

Configured as JVM system properties

Configured as environment variables

Enabling additional reports

Additional Reports

Tagging the provider before verification results are published [4.0.1+]

Enabling retry when there are unknown results (4.1.11+)